Skid Steer Mower Attachment — Prime Attachments
Enter your email and delivery ZIP to get a freight estimate.
Cut thick brush, saplings, and small trees with a 417 lb flywheel, four free spinning blades, and standard or high flow hydraulic options.
When thick brush, saplings, and small trees start taking over your property, a light duty mower isn't going to cut it. The Prime Attachments Direct Drive Mower is built for demanding vegetation clearing, with a manufacturer rated cutting capacity of trees up to 8" in diameter. Its open front design helps operators engage heavy growth while reclaiming overgrown fields, trails, fence lines, and wooded areas.
At the center of this heavy duty mower is a 417 lb flywheel with four free spinning blades, powered by a direct drive hydraulic motor. The heavy rotating assembly helps maintain cutting momentum through thick vegetation, while 1/4" Grade 50 steel decking, reinforced gussets, and a fully welded double push bar provide durability for aggressive land clearing work.
Available in 72" and 80" widths, with standard flow (20 to 25 GPM) or high flow (26 to 40 GPM) configurations, this American-made skid steer brush mower gives contractors and landowners the ability to match the attachment to their machine. Choose the correct hydraulic configuration and put your skid steer to work clearing the ground you've been meaning to reclaim.
UP TO 8" TREE CUTTING CAPACITY
Manufacturer rated for cutting trees up to 8" in diameter, allowing operators to tackle thick brush, saplings, and small trees during demanding land clearing work.
417 LB ROUND FLYWHEEL
The massive rotating flywheel helps maintain momentum through thick vegetation, providing the cutting assembly with the inertia needed for heavy brush clearing.
FOUR FREE SPINNING BLADES
Four swinging cutting blades handle brush, saplings, and woody vegetation while allowing individual blades to pivot during operation.
STANDARD AND HIGH FLOW OPTIONS
Choose a standard flow model for 20 to 25 GPM or a high flow model for 26 to 40 GPM, depending on your skid steer's auxiliary hydraulic system.
REINFORCED GRADE 50 STEEL DECK
Heavy 1/4" steel decking, additional gussets, full length runners, and a fully welded double push bar reinforce the mower for demanding cutting conditions.
TOP ACCESS FOR BLADE CHANGES
A top access opening provides easier access to the cutting assembly for blade replacement and maintenance, helping reduce time spent servicing the mower.
| Specification | Details |
|---|---|
| Manufacturer | Prime Attachments |
| Attachment Type | Direct Drive Skid Steer Brush Mower |
| Mounting System | Skid Steer Quick Attach (SSQA) |
| Available Sizes | 72" and 80" |
| Hydraulic Configurations | Standard Flow and High Flow |
| Standard Flow Requirement | 20 to 25 GPM |
| High Flow Requirement | 26 to 40 GPM |
| Drive System | Direct Drive Hydraulic Motor |
| Maximum Rated Tree Diameter | Up to 8" |
| Flywheel | 417 lb Round Flywheel |
| Cutting Blades | 4 Free Spinning Blades |
| Deck Construction | 1/4" Grade 50 Steel |
| Deck Reinforcement | Additional Steel Gussets |
| Push Bar | Fully Welded Double Push Bar |
| Front Design | Open Front |
| Bearing Housing | Heavy Duty |
| Runners | Full Length |
| Blade Maintenance Access | Top Access Opening |
| Overall Height | 29" |
| Primary Applications | Heavy Brush Clearing, Sapling Removal, Small Tree Cutting, Trail Maintenance, and Land Reclamation |
| Country of Manufacture | USA |
| Model | Width | Flow | Weight |
|---|---|---|---|
| DDBM 72 | 72" | 20-25 GPM | 1,786 lbs |
| DDBM 80 | 80" | 20-25 GPM | 1,950 lbs |
| HFDDBM 72 | 72" | 26-40 GPM | 1,795 lbs |
| HFDDBM 80 | 80" | 26-40 GPM | 1,960 lbs |
| Dimension | 72" Model | 80" Model |
|---|---|---|
| Overall Length | 77" | 87" |
| Overall Width | 75" | 84" |
| Overall Height | 29" | 29" |
Standard Flow Models (20 to 25 GPM): The DDBM 72 and DDBM 80 are designed for skid steers with auxiliary hydraulic flow within the manufacturer's standard flow range. Both feature the direct drive motor, 417 lb flywheel, and four free spinning blades.
High Flow Models (26 to 40 GPM): The HFDDBM 72 and HFDDBM 80 are the manufacturer's high flow configurations for machines operating within the 26 to 40 GPM hydraulic range. These are separate models, not simply the standard mower operated at a higher flow rate.
Why Hydraulic Flow Matters: The mower's hydraulic motor must be matched to the skid steer's auxiliary hydraulic output. A machine with high flow capability does not automatically require the high flow mower if it can also operate in the required standard flow range. Select the configuration that matches the hydraulic output available during operation.
72" vs. 80" Cutting Width: The 72" mower provides a narrower cutting path and lower attachment weight. The 80" mower covers a wider area per pass but requires the loader to carry additional attachment weight. Both widths are available in standard and high flow configurations.
Tree Cutting Capacity: Prime rates the Direct Drive Mower for trees up to 8" in diameter. Actual cutting performance depends on vegetation type, cutting conditions, and the hydraulic power available from the machine.
Machine Compatibility: Designed for compatible skid steers equipped with the Skid Steer Quick Attach mounting system and appropriate auxiliary hydraulics. Confirm your skid steer's rated operating capacity, hydraulic flow, pressure requirements, and connection compatibility before selecting a model.
Prime Attachments Direct Drive Brush Mower Demonstration
Calculating Your Shipping Quote:
You can instantly calculate shipping quotes to the lower 48 states by adding this product to your cart, proceeding to the checkout page, and entering your shipping address. This process allows you to test different addresses and configurations. Please contact us directly for quotes for shipping internationally or outside the continental US.
Cost-Effective Delivery Hierarchy:
To help you save on freight costs, shipping options are priced in this order (least to most expensive):