Iron & Oak 30-Ton Tow-Behind Log Splitter - Honda GX270
Get a freight estimate for your address.
Found a
lower price?
Get in touch today
and we'll beat it — guaranteed!
Get a freight estimate for your address.
Get in touch today
and we'll beat it — guaranteed!
Split heavy rounds horizontally or vertically with a commercial-grade Iron & Oak log splitter built for firewood work, rental fleets, and frequent property maintenance.
The Iron & Oak BHVH3018GX 30-ton log splitter pairs a Honda GX270 engine with a 16 GPM hi-lo two-stage hydraulic pump for dependable splitting force. It is built for logs up to 25 in. long and runs in both horizontal and vertical positions, so oversized rounds can be rolled into place instead of lifted onto the beam.
Set up for serious homeowner, acreage, and rental-duty use, this splitter includes a 2 in. hitch, highway-rated tires, tow cables, fenders, a log cradle, log dislodger, and a larger jack wheel as standard equipment.
The 4-stage hydraulic filtration system, heavy-duty wedge, Halite commercial cylinder seals, and offset control valve are practical details that matter when the splitter is expected to work season after season.
30-Ton Splitting Force
Hydraulic power is rated at 30 tons for green logs, large rounds, and routine firewood production.
Horizontal and Vertical Operation
Split lighter logs on the beam or switch to vertical mode for heavy rounds that are safer to roll into place.
Honda GX270 Engine
The 270cc Honda GX270 engine drives a 16 GPM hi-lo two-stage pump for reliable outdoor power.
Tow-Behind Setup
An auto-latch beam, 2 in. hitch, highway-rated tires, tow cables, and larger jack wheel help move the splitter between work areas.
4-Stage Hydraulic Filtration
A suction strainer, return-line filter, breather cap air filter, and magnetic drain plug help protect the hydraulic system from damaging contamination.
Heavy-Duty Wedge and Cylinder Seals
The wedge uses five bolts per side, and Halite commercial cylinder seals help maintain consistent pressure under frequent use.
Operator-Friendly Standard Equipment
A log cradle, log dislodger, fenders, offset valve, enhanced transition handle, and larger jack wheel make the splitter easier to position and operate.
Made in the USA with US and Imported Components
Iron & Oak lists this splitter as made in the USA with US and imported components.
| Equipment Type | Tow-behind power log splitter |
| Splitting Force | 30 tons |
| Operation | Horizontal and vertical |
| Engine | Honda GX270 |
| Displacement | 270cc |
| Pump Type | 16 GPM hi-lo 2-stage |
| Cycle Time | 12 seconds |
| Cylinder Size | 4.5 in. x 24 in. clevis type, 1.75 in. rod |
| Hydraulic Capacity | 10.5 gal. system total, 9 gal. tank |
| Maximum Log Length | 25 in. |
| Splitting Height | 32 in. |
| Hitch | 2 in. |
| Tires | 4.8 in. x 8.0 in. highway rated |
| Wedge | Heavy-duty, 5 bolts per side |
| Dry Weight | 705 lb. |
| Country of Origin | Made in the USA with US and imported components |
Calculating Your Shipping Quote:
You can instantly calculate shipping quotes to the lower 48 states by adding this product to your cart, proceeding to the checkout page, and entering your shipping address. This process allows you to test different addresses and configurations. Please contact us directly for quotes for shipping internationally or outside the continental US.
Cost-Effective Delivery Hierarchy:
To help you save on freight costs, shipping options are priced in this order (least to most expensive):